ACCENTEpoxy Floors
ACCENTEpoxy Floors
A desert subdivision with lake-town street names and no lake. We drive about 19 miles east from Lancaster to give its garages and patios a floor built for the high desert.
Accent Epoxy Floors installs epoxy garage floors, workshop floors, patios and driveways in Lake Los Angeles, about 19 miles east-southeast of our Lancaster base. A two-car flake epoxy floor takes one day and costs $2,600 to $4,000. We diamond grind first and give a free estimate with a fixed written quote.
Lake Los Angeles is a desert community with a lake in its name and none in sight. In 1967 developers bought about 4,000 acres, cut it into 4,465 lots and refilled a natural lake as a sales draw. The lake evaporated in the early 1980s, but the street names, such as Biglake Avenue, Lakespring Avenue and Longmeadow Avenue, still sound like a resort town. Today the community has 13,187 residents (2020 census) at about 2,661 feet, and Accent Epoxy Floors is based about 19 miles west-northwest in Lancaster.
Because the land was sold as individual lots, this is not a place of identical tract houses. The 2020 census counted 3,762 housing units here, about 72.5 percent owner-occupied. We do not assume anything about the size, age or layout of a garage. We measure it, test the slab for moisture and cracks, and explain the plan in plain terms. The area has also been a film location since 1938, with the Four Aces and Club Ed sets still standing, and Bonanza segments and stock footage were shot here.
We serve both ZIP codes, 93535 and 93591, including homes along Biglake, Lakespring and Longmeadow avenues and on either side of Avenue O. Choose a flake epoxy floor, a solid color epoxy floor, a metallic epoxy floor or a quartz finish, and see the color chart for blends. Call (661) 545-6676 Monday through Thursday 8 AM to 5 PM or Friday 8 AM to 2 PM for a free estimate, a same-day reply and a fixed written quote.
A development that sells lots one at a time ends up with every kind of garage: attached two-car spaces, three-car garages, detached workshops and carports that someone later closed in. That variety is why we measure before we quote. A square-foot price only works once we know the actual area, the slab condition and what stays in the room. Our approved ranges are $6.50 to $10 per square foot for a flake epoxy floor, with a two-car garage up to 400 square feet at $2,600 to $4,000 and our minimum project at $2,600. Solid color starts at $3,800, and metallic runs $5,000 to $7,400 for typical projects. A detached garage or shop may have a slab poured at a different time than the house, and an older slab may have more cracks. We grind it, fill the cracks and test for moisture. If a stain or crack tells us something is wrong, we say so before the work starts. Send photos with your request and we can usually tell you the likely scope before we arrive. Tell us how many cars you park, what you store and whether the door opens onto gravel or pavement, because that decides how much traction and wear resistance we build in.
Lake Los Angeles sits at about 2,661 feet, roughly the same height as Palmdale and a few hundred feet above Lancaster. We plan around Palmdale's numbers, the closest match: a July mean high near 97.6 degrees, a January mean low near 32.8 degrees and about 35 afternoons a year at or above 100 degrees. Valley-wide advisories mention gusts to 50 mph and blowing dust. Here is how that affects a floor. Dust finds its way into any garage with a gap at the door, and bare concrete holds it as a pale film. A sealed epoxy surface sweeps and mops clean. A flake blend hides what is left and adds grip when the floor is damp. If the garage door is open often, a darker or mid-tone blend from the color chart will show less dust.
The old lake is gone, but plenty of homes here still have patios and pools, and every outdoor slab faces the same sun. Unless a roof or a tree shades it, a driveway or patio takes the full desert day. We coat outdoor concrete with a quartz or sand finish under a UV-stable polyaspartic topcoat. It takes two to three days and costs $8 to $12 per square foot, about $3,200 to $4,800 for typical projects. The textured finish gives traction on a wet pool deck and on stairs. Before coating we grind the slab, repair cracks and plan the install for a day with stable temperatures and light wind. A lighter color is cooler underfoot in July. We also talk through hot-tire pickup on driveways, which depends on prep, cure conditions and the right topcoat. If you want to protect the concrete without changing its look, grind and seal costs $6.50 to $9 per square foot, about $2,600 to $3,600 for typical projects.
A little planning makes a flake or solid color job go smoothly, especially on a lot that is 19 miles from our base. Empty the garage of cars, shelves, boxes and anything on the floor. If a big cabinet or workbench cannot move, tell us ahead of time and we will plan the cut-ins. Take a few photos of the slab, any cracks, any oil stains and the garage door opening, and send them with your request. Know where the water spigot is, since we may need it for cleanup. Keep pets and children out of the garage during the work. If you want the floor to match a color you have seen, bring a swatch or choose from the color chart. On the day, we start early so the slab is cooler, and we tell you when the floor can take foot traffic and when it can take a car. After that, a soft broom and a damp mop are all it needs.
We install floors throughout Lake Los Angeles and the surrounding area, including these neighborhoods and ZIP codes.
Local resources: LA County Unincorporated Communities Annual Report FY 23-24, Lake Los Angeles
Lake Los Angeles is a high-desert community at about 2,661 feet, east of Palmdale. We use Palmdale as the closest reliable source: a July mean high of 97.6 degrees, a January mean low of 32.8 degrees, about 35 afternoons a year at or above 100 degrees and about 5.9 inches of annual rain. Wind and dust figures are valley-wide only, including advisory gusts to 50 mph and blowing dust that can cut visibility below a mile. For your floor, that means a UV-stable polyaspartic topcoat on any sun-exposed slab, a smooth sealed surface that cleans up after dust, and a start time early enough that the slab is not already hot.
Durable, easy-to-clean garage floors that resist hot-tire pickup, oil and salt. Most two-car garages are done in one day.
Learn more →Full-rejection flake over a moisture-barrier epoxy basecoat, sealed with a UV-stable polyaspartic topcoat. Installed in one day.
Learn more →A clean, seamless pigmented floor in gloss, satin or matte for garages, workshops, interiors and commercial spaces.
Learn more →Hand-guided metallic pigments create marble and lava effects, so no two floors look alike. A statement floor for homes and showrooms.
Learn more →Double-broadcast colored quartz or a sand finish for extra grip and durability on stairs, patios, mudrooms and commercial floors.
Learn more →Diamond-ground concrete finished with a clear sealer for a natural, low-maintenance floor at the lowest installed price.
Learn more →UV-stable, slip-resistant coatings for patios, walkways, driveways and pool decks that stay cooler underfoot.
Learn more →Seamless, hygienic floors for offices, retail, restaurants, warehouses and plants, installed around your hours.
Learn more →Timelines: Flake system 1 day · Metallic system 3–4 days · Quartz & sand finish system 2–3 days · Solid color system 3 days. Pick a color from the color chart.
Typical ranges for the area. Minimum project $2,600. Commercial and industrial work is quoted after a site visit.
| System | Price per sq ft | Typical project |
|---|---|---|
| Flake system (garage, up to 400 sq ft) | $6.50 – $10 per sq ft | $2,600 – $4,000 |
| Solid color system | $9.50 – $11.50 per sq ft | $3,800 – $4,600 |
| Metallic epoxy system | $12.50 – $18.50 per sq ft | $5,000 – $7,400 |
| Quartz & sand finish system | $9 – $16.50 per sq ft | $3,600 – $6,600 |
| Grind & seal (clear sealer) | $6.50 – $9 per sq ft | $2,600 – $3,600 |
| Patio, driveway & pool deck | $8 – $12 per sq ft | $3,200 – $4,800 |
| Commercial & industrial | Quoted after a site visit | Quoted per project |
Prices and details reviewed November 2026. Project examples assume a two-car garage up to 400 sq ft. Free on-site measurement and written estimate.
Yes, a garage slab should be checked for moisture before it is coated, even in a dry desert climate. Concrete can hold and pass water vapor, and that vapor can push a coating off the slab. Calcium chloride and in-slab relative humidity tests measure it, and a moisture-barrier basecoat protects against it.
Read the answer →Yes, epoxy can handle an RV garage or workshop, because the concrete slab carries the weight and the coating protects its surface. The slab must be sound. A good system adds a deep bond, traction and a UV-stable topcoat. Large floors are measured and quoted at a free estimate.
Read the answer →A coated pool deck is not slippery or too hot when it is built for the job. Slip resistance comes from texture added to the topcoat, and surface temperature depends mostly on color and sun. Lighter colors run cooler. Accent Epoxy Floors coats pool decks with a UV-stable topcoat and a grip finish.
Read the answer →For a car collector or show garage, a metallic epoxy floor gives the most dramatic showroom look, while a flake floor is the easier one to live with. Metallic shows dust, scratches and tire marks more and costs more. Flake hides wear, installs in one day and costs less.
Read the answer →A flake epoxy garage floor in Lake Los Angeles costs $6.50 to $10 per square foot, or $2,600 to $4,000 for up to 400 square feet. Solid color starts at $3,800, metallic runs $5,000 to $7,400 and grind and seal runs $2,600 to $3,600. Our minimum project is $2,600. A free estimate gives you a fixed written quote. The price rises with square footage, so a larger garage or shop costs more, and we put the exact figure in writing.
Accent Epoxy Floors does. We are based in Lancaster, about 19 miles west of Lake Los Angeles, and we are 5-star rated on Google. We diamond grind every slab, use VOC-free polyaspartic sealant and give a free estimate with a fixed written quote. Call (661) 545-6676 and we will confirm your address.
A standard two-car flake epoxy garage floor takes one day. Solid color takes about three days, metallic takes 3 to 4 days and a quartz or sand finish takes 2 to 3 days. Because lots here vary, we measure first and confirm the timing in your written quote. Ask us when you can drive on the floor. Metallic and solid color jobs run longer than flake, so plan around the garage being out of use for those days.
Yes. Detached garages and workshops are common on individual lots, and we coat them the same way as attached ones. We measure, test the slab for moisture and cracks, grind and choose the system. Send photos with your request. Business and commercial spaces are quoted after a site visit.
Yes, when it is prepped and topcoated correctly. A UV-stable polyaspartic topcoat resists sun and yellowing, and the sealed surface sweeps clean after dust blows through. Heat shortens working time during the install, so we start early and plan the day. Good prep is what protects against hot-tire pickup later. If your door has a gap, a new seal also keeps wind-blown dust out of the coated floor.
Usually not for a garage floor coating, since it is a surface finish and not structural work. Lake Los Angeles is unincorporated, so Los Angeles County handles planning and building questions. If the project changes a structure, check with the county first. We can tell you what we have seen before starting. We will also point out anything on your lot that could need a separate approval, such as a new structure.
A quartz or sand finish under a UV-stable polyaspartic topcoat is the best choice for most patios and driveways here. It adds traction, resists sun damage and hides dirt. Outdoor coatings run $8 to $12 per square foot, about $3,200 to $4,800 for typical projects. Lighter colors stay cooler underfoot. The right color is easier to judge on a sample held against your own concrete in daylight.
It is worth choosing the contractor who preps properly and gives a fixed written quote, wherever they are based. Our crew comes from Lancaster, about 19 miles away by straight line, with the same materials and price ranges we use anywhere. The free estimate costs nothing, so you can compare before you decide. Choosing a contractor mostly comes down to prep, a clear written scope and a straight answer on cost.
Call (661) 545-6676 or send the form at the top of the page. We reply the same day with a time to measure.