ACCENTEpoxy Floors
ACCENTEpoxy Floors
Garage, workshop and driveway floors for the Fruit Basket of the Antelope Valley, about 14 miles from our Lancaster base.
Accent Epoxy Floors installs epoxy garage floors, workshop floors, driveways and patios in Littlerock, about 14 miles straight-line from our Lancaster base. A two-car flake epoxy floor takes one day and costs $2,600 to $4,000. We diamond grind every slab and finish with a VOC-free, UV-stable polyaspartic topcoat.
Littlerock is a small foothill community in Los Angeles County. The 2020 census counted 1,535 residents, and the town sits at about 2,890 feet, roughly 530 feet higher than Lancaster. It takes its name from the Little Rock Wash, and locals call it the Fruit Basket of the Antelope Valley because almonds, apples, peaches and pears were grown here and a packinghouse was already operating in 1946. Our crew travels from Lancaster, about 14 miles away in a straight line, so a free estimate is easy to book and we reply the same day.
The census counted 482 housing units in Littlerock, which is a small number, and it shapes how we work here. Every estimate is a one-on-one visit at your property. We measure the slab, test it for moisture, mark cracks and spalls, ask what you park, store and build in the space, and explain the plan in plain language. You get a fixed written quote before anything is scheduled. Payment is by cash, check or credit card. If you are unsure whether an older slab is worth coating, we are happy to answer that before you commit to anything.
We cover the whole Littlerock area in ZIP code 93543, including the Little Rock Wash, the State Route 138 corridor, the San Gabriel Mountains foothills and the former orchard and packinghouse area. Littlerock and neighboring Sun Village share a Community Standards District that Los Angeles County approved in 2007. Those district rules cover development standards, so if your plans go beyond coating an existing floor, ask the county first. For the coating itself, you can choose a flake epoxy floor, a solid color epoxy floor, a metallic epoxy floor or a quartz finish. Browse the color chart, then request your free estimate.
We install floors throughout Littlerock and the surrounding area, including these neighborhoods and ZIP codes.
Local resources: Los Angeles County Department of Regional Planning, Antelope Valley Area Plan
Littlerock sits near 2,890 feet in the San Gabriel foothills. The nearest published weather record comes from Pearblossom: a July mean high of 98.7F, about 6.75 inches of rain a year, around an inch of snow, and a record low of 8F. Summers are hot and dry, winter mornings can freeze, and strong UV beats on any exposed slab. That is why outdoor floors get a UV-stable polyaspartic topcoat and why we diamond grind and vacuum right before the basecoat, since dust and wind-blown grit stop coatings from bonding.
Durable, easy-to-clean garage floors that resist hot-tire pickup, oil and salt. Most two-car garages are done in one day.
Learn more →Full-rejection flake over a moisture-barrier epoxy basecoat, sealed with a UV-stable polyaspartic topcoat. Installed in one day.
Learn more →A clean, seamless pigmented floor in gloss, satin or matte for garages, workshops, interiors and commercial spaces.
Learn more →Hand-guided metallic pigments create marble and lava effects, so no two floors look alike. A statement floor for homes and showrooms.
Learn more →Double-broadcast colored quartz or a sand finish for extra grip and durability on stairs, patios, mudrooms and commercial floors.
Learn more →Diamond-ground concrete finished with a clear sealer for a natural, low-maintenance floor at the lowest installed price.
Learn more →UV-stable, slip-resistant coatings for patios, walkways, driveways and pool decks that stay cooler underfoot.
Learn more →Seamless, hygienic floors for offices, retail, restaurants, warehouses and plants, installed around your hours.
Learn more →Timelines: Flake system 1 day · Metallic system 3–4 days · Quartz & sand finish system 2–3 days · Solid color system 3 days. Pick a color from the color chart.
Fruit growing shaped Littlerock, and some properties here still carry the buildings that came with it: sheds, barns, workshops and storage rooms with slabs that were poured for work, not for looks. If you own one of those spaces, the concrete may be rough, stained with oil, chipped at the edges or cracked where the ground has moved. That is fixable. We diamond grind the surface to remove weak concrete and old residue, cut and fill cracks, repair spalls and vacuum the slab clean before any coating goes down. Then you choose the finish. Grind and seal runs $6.50 to $9 per square foot, or $2,600 to $3,600 for typical garage-size areas, and keeps a natural concrete look. A solid color epoxy floor starts at $3,800, runs $9.50 to $11.50 per square foot, and installs in about three days. Both are easy to sweep and hose out. If the building is a working shop, we can talk through cove base at the walls and a texture that gives boots and tires grip. Older slabs sometimes have no vapor barrier under them, so we test for moisture and use a moisture-barrier epoxy basecoat where the readings call for it. We would rather tell you what a slab can and cannot take at the estimate than discover it halfway through. Bring photos of the building to the estimate if you can, and note any spot where water has stood. We look at the roof line, the door threshold and the slab edge together, because a floor lasts longest when water has somewhere else to go. For a barn or shop with a dirt apron, we coat up to the concrete and finish the edge cleanly.
Littlerock sits higher than the valley floor, and that changes the install-day plan. Cooler mornings and a wide swing between day and night mean we watch slab temperature, not just air temperature. A warming slab can push trapped air up into a fresh coating, which shows up as pinholes, so we schedule coating passes for the part of the day when the concrete is cooling or steady. Heat also shortens the working time of the materials, so we start early and keep mixing batches small. The standard garage system is a flake epoxy floor: diamond grinding, crack repair, a moisture-resistant primer or moisture-barrier basecoat, a full-rejection flake broadcast and a UV-stable polyaspartic topcoat. It installs in one day and costs $6.50 to $10 per square foot, or $2,600 to $4,000 for a two-car garage up to 400 square feet. The flake hides dust, tire marks and the odd drip of oil, and the topcoat resists hot-tire pickup when a truck comes in off a hot highway run. If you want a bolder look, a metallic epoxy floor takes three to four days and runs $12.50 to $18.50 per square foot, or $5,000 to $7,400 for a two-car garage. After the topcoat is on, give it the full cure time we quote before parking, because a floor that is still hardening marks easily. A simple mop with mild soap keeps it clean afterward.
A wash is a natural drainage channel, and the name tells you something about how water moves through this area during a storm. If your driveway, patio or walkway sits near the wash or on a slope, tell us at the estimate where water runs and where it collects. We plan the coating around those paths, seal at joints and edges, and pick a texture that keeps wet feet from slipping. For outdoor concrete we usually recommend a quartz finish or a sand finish under a UV-stable polyaspartic topcoat. It installs in two to three days, and the coating stays stable in strong sun where ordinary epoxy would chalk or yellow. Quartz and sand finishes run $9 to $16.50 per square foot, or $3,600 to $6,600 for typical projects. Outdoor patios, driveways and pool decks run $8 to $12 per square foot, or $3,200 to $4,800 for typical projects. Light colors stay cooler on bare feet and paws. Foothill winters can bring freezing mornings, so we apply outdoor coatings when the forecast is dry and the slab has warmed, and we tell you when it is safe to walk or park on the surface. Gravel meets concrete in many yards here, so we finish the transition cleanly and tell you what upkeep the edge needs.
Not every job in Littlerock is a home. Along State Route 138 you will find small shops, equipment yards and working buildings that need a floor to match. A commercial floor is quoted after a site visit, because the price depends on square footage, traffic, equipment, chemicals and how long the space can be closed. We plan phases when a business cannot go dark for a full week. Systems we use include solid color epoxy for easy cleaning, flake for grip, and chemical-resistant coatings where fuel, solvents or cleaners are part of the day. If you operate out of a barn, hangar-style building or metal shop on your own property, the same site-visit approach applies. Commercial coatings can be installed in sections, so one bay or room stays usable while another cures. We also build in a cove base along the wall, which keeps fluids and wash water from sitting in the corner joint. Tell us what you do in the building and what spills in it, and we will recommend a system that holds up. Small shops often choose a solid color for easy mopping, while garages that double as work areas choose flake for grip. Either way, the estimate is free, the quote is written and the price is fixed.
Epoxy or polyaspartic is a good base for a garage gym, but it is not a replacement for mats. The coating handles racks, benches and foot traffic well. It does not cushion impact, so dropped weights can chip it. Use mats or platforms where you lift heavy and drop plates.
Read the answer →Yes, a fully cured epoxy or polyaspartic floor is a safe, easy-to-clean surface for dogs, kennels and grooming rooms. The sealed surface does not soak up urine or fur. The real tradeoffs are paw traction when wet, which cleaners you use, and keeping animals off the floor until it has cured.
Read the answer →The right aircraft hangar floor is one specified for the hangar, not borrowed from a garage. It must resist fuel, Skydrol and hydraulic fluid, carry tugs, jacks and aircraft loads, stay slip resistant, and fit your downtime. Accent Epoxy Floors specifies the system after a site visit.
Read the answer →Plan on about one day of coating work for a flake system, two to three days for quartz, three days for solid color and three to four days for metallic. Your total closure also depends on moving stock, repairs and cure time before heavy traffic, so we confirm a schedule during the site visit.
Read the answer →Typical ranges for the area. Minimum project $2,600. Commercial and industrial work is quoted after a site visit.
| System | Price per sq ft | Typical project |
|---|---|---|
| Flake system (garage, up to 400 sq ft) | $6.50 – $10 per sq ft | $2,600 – $4,000 |
| Solid color system | $9.50 – $11.50 per sq ft | $3,800 – $4,600 |
| Metallic epoxy system | $12.50 – $18.50 per sq ft | $5,000 – $7,400 |
| Quartz & sand finish system | $9 – $16.50 per sq ft | $3,600 – $6,600 |
| Grind & seal (clear sealer) | $6.50 – $9 per sq ft | $2,600 – $3,600 |
| Patio, driveway & pool deck | $8 – $12 per sq ft | $3,200 – $4,800 |
| Commercial & industrial | Quoted after a site visit | Quoted per project |
Prices and details reviewed November 2026. Project examples assume a two-car garage up to 400 sq ft. Free on-site measurement and written estimate.
A flake epoxy garage floor costs $6.50 to $10 per square foot, or $2,600 to $4,000 for a two-car garage up to 400 square feet. Our minimum project is $2,600. Grind and seal is $6.50 to $9 per square foot. A free estimate at your property gives you a fixed written quote, and we tell you before work starts if the slab needs unusual repair.
Yes. Our crew works out of Lancaster and Littlerock is about 14 miles away in a straight line, along the State Route 138 side of the valley. We schedule estimates and installs here as part of our regular Antelope Valley routes. Call (661) 545-6676 Monday through Thursday 8 AM to 5 PM, or Friday 8 AM to 2 PM, and we reply the same day.
Yes, if the slab is sound. We diamond grind to remove oil and weak concrete, fill cracks, repair chips and test for moisture before choosing a system. Grind and seal at $6.50 to $9 per square foot is a good fit for work buildings. If the concrete is cracked through or sinking, we say so at the estimate instead of covering it.
A flake floor takes one day, solid color three days, metallic three to four days, and quartz or sand finishes two to three days. A standard two-car garage in flake is done in a single day. Before we leave, we tell you when you can walk on it, when cars can return and what to avoid while it cures.
Yes, when the system is built for it. A UV-stable polyaspartic topcoat resists yellowing in strong sun, and a properly ground slab with a moisture-resistant primer or moisture-barrier basecoat bonds through freeze and heat swings. The nearest published weather record, from Pearblossom, shows a July mean high near 99F and a record low of 8F.
Rules depend on your property, so ask Los Angeles County planning before you start. Littlerock and Sun Village share a county Community Standards District, which can affect structures and signs. Coating an existing slab is a different job from building something new, but we cannot confirm permit rules for you. We can give you a written scope for the county.
A solid color epoxy floor starts at $3,800, running $9.50 to $11.50 per square foot. A metallic epoxy floor costs $12.50 to $18.50 per square foot, or $5,000 to $7,400 for a two-car garage. Solid takes three days and metallic three to four. Look at the color chart, then request a free estimate for a fixed price.
Outdoor concrete coatings run $8 to $12 per square foot, or $3,200 to $4,800 for typical driveways, patios and pool decks. Quartz and sand finishes run $9 to $16.50 per square foot and take two to three days. Size, slope and repairs change the total, so we measure on site and give you a written quote.
Call (661) 545-6676 or send the form at the top of the page. We reply the same day with a time to measure.