ACCENTEpoxy Floors
ACCENTEpoxy Floors
Plain-spoken epoxy and polyaspartic floors for Del Sur garages and rural outbuildings, eight miles west of our Lancaster base.
Del Sur homeowners can get a flake epoxy garage floor installed in one day by Accent Epoxy Floors, whose crew drives about eight miles west from Lancaster. A two-car floor costs $2,600 to $4,000 and is built on diamond grinding, a basecoat, flake broadcast and a UV-stable polyaspartic topcoat. The estimate is free and the quote is fixed.
Del Sur is a small, unincorporated community on the west side of the Antelope Valley, in ZIP code 93536. The name is Spanish for 'of the south.' Although it is not part of the City of Lancaster, Lancaster surrounds it, and public references put the population at about 1,750. We drive from Lancaster, about eight miles away in a straight line, so Del Sur sits close to our base even though it feels like open country.
This page is shorter on local trivia than some of our others, and we would rather say so than pad it. The public record on Del Sur is thin: no verified elevation, no verified housing era, no verified HOA information and no weather station of its own. What is reliable is the valley around it. Lancaster, next door in every direction, averages a July high of about 98F, about 68 freezing mornings a year and just under seven inches of rain. That is what a Del Sur slab lives through, and it is what we plan around.
We serve Del Sur and the rural west valley with the same process as everywhere else: a free on-site estimate, a measured quote, diamond grinding, a moisture and crack check, and a finish that fits how you use the space. Look through the color chart, think about whether you want a flake epoxy floor, a solid color epoxy floor, a metallic epoxy floor or a quartz finish, and send us a photo of the garage if you like. We reply the same day.
Yes, a garage slab should be checked for moisture before it is coated, even in a dry desert climate. Concrete can hold and pass water vapor, and that vapor can push a coating off the slab. Calcium chloride and in-slab relative humidity tests measure it, and a moisture-barrier basecoat protects against it.
Read the answer →Yes, epoxy can handle an RV garage or workshop, because the concrete slab carries the weight and the coating protects its surface. The slab must be sound. A good system adds a deep bond, traction and a UV-stable topcoat. Large floors are measured and quoted at a free estimate.
Read the answer →A coated pool deck is not slippery or too hot when it is built for the job. Slip resistance comes from texture added to the topcoat, and surface temperature depends mostly on color and sun. Lighter colors run cooler. Accent Epoxy Floors coats pool decks with a UV-stable topcoat and a grip finish.
Read the answer →For a car collector or show garage, a metallic epoxy floor gives the most dramatic showroom look, while a flake floor is the easier one to live with. Metallic shows dust, scratches and tire marks more and costs more. Flake hides wear, installs in one day and costs less.
Read the answer →
We can say with confidence that Del Sur is unincorporated, that its ZIP code is 93536, that Lancaster surrounds it and that it lies in the rural west end of the valley. We cannot say how old its houses are, how large its lots run, how many garages are attached or which streets have an HOA. We would rather leave those out than invent them, because a floor quote built on a guess is a bad quote. So the plan is simple. Tell us what you have: a two-car attached garage, a detached shop, a carport slab, a back patio. We come out, measure it and look at the concrete itself. Then we explain the system in plain language. A flake epoxy floor is a one-day install and costs $6.50 to $10 per square foot, about $2,600 to $4,000 for a two-car garage up to 400 square feet. Our minimum project is $2,600. If the slab turns out to need extra repair, we say so before work starts, and we never add surprise charges on install day. Ask us anything about the process. If we do not know, we say so.
Living in an unincorporated community that sits inside a city's borders can blur the question of who is in charge. Los Angeles County, not the City of Lancaster, governs unincorporated areas, and the county's Antelope Valley Area Plan covers this part of the valley. For a floor coating on an existing slab, start by asking your HOA or landlord, if one applies. For anything beyond that, such as new construction, a detached building or a business use, call the county's Department of Regional Planning or Building and Safety before you book. We are contractors, not permit officers, and we cannot confirm local rules for you. What we can do is hand you a written scope, spec sheets for the materials and a sample color to attach to any request. Our materials are VOC-free polyaspartic sealants, which matters if a form asks about emissions. Ask early. Approval, not the coating, is the step most likely to push back a start date.
The west side of the valley is rural country, and rural properties often carry more than a house. If your property has a detached garage, a workshop, a hobby building or a pad for an RV, we can coat any of them as long as the floor is concrete and sound. We do not assume what is on your lot, so tell us. For larger or harder-working floors, a solid color epoxy floor is a strong choice. It takes three days, costs $9.50 to $11.50 per square foot and starts at $3,800. A cove base can carry the coating up the wall so there is no seam to collect grit. Heavy equipment or vehicles with muddy tires call for texture, and a quartz finish at $9 to $16.50 per square foot provides it in two to three days. If you only want to seal the concrete and keep a natural gray look, grind and seal is $6.50 to $9 per square foot. For a back patio or a driveway, outdoor concrete coatings run $8 to $12 per square foot. We recommend a UV-stable topcoat for anything outside.
Valley-wide weather facts apply to Del Sur, and they are demanding. National Weather Service advisories for Lancaster and Palmdale cite south to southwest winds of 20 to 35 mph with gusts to 50 mph, and blowing dust that can drop visibility below one mile. Lancaster averages about 68 mornings a year at or below freezing, and a hard freeze in November 2023 brought a low of 22F. We do not have wind or temperature figures for Del Sur itself, and the west end may differ, so we use Lancaster's numbers as a guide and nothing more. What this means for a floor is practical. We keep the garage door area clean during coating, because wind carries dust. We start summer jobs early, because heat shortens working time. In winter we check slab temperature, because a cold slab slows curing and a morning frost can leave moisture on concrete. Once cured, the floor shrugs off the weather, and a sealed surface sweeps and mops far easier than raw concrete after a dusty week.
Durable, easy-to-clean garage floors that resist hot-tire pickup, oil and salt. Most two-car garages are done in one day.
Learn more →Full-rejection flake over a moisture-barrier epoxy basecoat, sealed with a UV-stable polyaspartic topcoat. Installed in one day.
Learn more →A clean, seamless pigmented floor in gloss, satin or matte for garages, workshops, interiors and commercial spaces.
Learn more →Hand-guided metallic pigments create marble and lava effects, so no two floors look alike. A statement floor for homes and showrooms.
Learn more →Double-broadcast colored quartz or a sand finish for extra grip and durability on stairs, patios, mudrooms and commercial floors.
Learn more →Diamond-ground concrete finished with a clear sealer for a natural, low-maintenance floor at the lowest installed price.
Learn more →UV-stable, slip-resistant coatings for patios, walkways, driveways and pool decks that stay cooler underfoot.
Learn more →Seamless, hygienic floors for offices, retail, restaurants, warehouses and plants, installed around your hours.
Learn more →Timelines: Flake system 1 day · Metallic system 3–4 days · Quartz & sand finish system 2–3 days · Solid color system 3 days. Pick a color from the color chart.
We install floors throughout Del Sur and the surrounding area, including these neighborhoods and ZIP codes.
Local resources: Los Angeles County Department of Regional Planning, Antelope Valley Area Plan (Del Sur appears on the county's Antelope Valley office community list)
We have no verified weather record for Del Sur, so we plan from Lancaster's: a July mean high of about 97.6F, a January mean low of about 31.3F, 6.81 inches of rain a year and roughly 68 mornings a year at or below freezing. Valley advisories mention wind gusts to 50 mph and blowing dust. The west end of the valley may differ, and we do not claim otherwise. We coat early in summer, check slab temperature in winter and finish outdoor concrete with a UV-stable polyaspartic topcoat.
Typical ranges for the area. Minimum project $2,600. Commercial and industrial work is quoted after a site visit.
| System | Price per sq ft | Typical project |
|---|---|---|
| Flake system (garage, up to 400 sq ft) | $6.50 – $10 per sq ft | $2,600 – $4,000 |
| Solid color system | $9.50 – $11.50 per sq ft | $3,800 – $4,600 |
| Metallic epoxy system | $12.50 – $18.50 per sq ft | $5,000 – $7,400 |
| Quartz & sand finish system | $9 – $16.50 per sq ft | $3,600 – $6,600 |
| Grind & seal (clear sealer) | $6.50 – $9 per sq ft | $2,600 – $3,600 |
| Patio, driveway & pool deck | $8 – $12 per sq ft | $3,200 – $4,800 |
| Commercial & industrial | Quoted after a site visit | Quoted per project |
Prices and details reviewed November 2026. Project examples assume a two-car garage up to 400 sq ft. Free on-site measurement and written estimate.
Yes. Del Sur is about eight miles west of our Lancaster base in a straight line, and we install flake, solid color, metallic and quartz floors there. Call (661) 545-6676 or send the estimate form, and we reply the same day. We visit, measure and give a fixed written quote at no cost. We accept cash, check and credit card.
A flake epoxy garage floor costs $6.50 to $10 per square foot, or $2,600 to $4,000 for a two-car garage up to 400 square feet. Grind and seal is $6.50 to $9, and metallic is $12.50 to $18.50. Our minimum project is $2,600. The free estimate gives you one fixed price after we measure and inspect the slab.
For most garages, a flake epoxy floor with a UV-stable polyaspartic topcoat is the best fit. It is tough, hides dust and installs in a day. For outdoor concrete, we favor a quartz or sand finish with the same topcoat. If you only want a natural look, grind and seal works. The right choice depends on the slab and the use.
Del Sur is unincorporated, so Los Angeles County governs it even though the City of Lancaster surrounds it. We cannot confirm permit rules, so ask the county's Regional Planning or Building and Safety office if your project goes beyond a surface coating. We provide spec sheets and color samples that you can attach to any request.
Yes, if the floor is sound concrete. We diamond grind to remove old paint, sealer and weak surface, fill cracks and then coat. Epoxy cannot bond to a loose surface, dirt or crumbling concrete, so we check first. If you have tile or a rubber surface down, tell us at the estimate and we will explain what has to come up.
A cured epoxy floor handles cold weather well. Freezes matter during installation, because a cold slab slows curing and can hold frost or moisture. Lancaster sees about 68 freezing mornings a year, so we check slab temperature and avoid coating on a morning that is too cold. We will offer a warmer day rather than risk a weak bond.
A flake epoxy floor takes one day, solid color three days, metallic three to four days and quartz or sand finish two to three days. Before we leave we tell you when you can walk on it and when cars can return. Clear what you can before the crew arrives, and plan to park outside for the length of the job.
The main benefits are a sealed surface that resists oil, stains and dust, a floor you can mop clean and a finish that hides footprints and brightens a dim garage. Flake adds some grip. The tradeoffs are that it needs proper prep and cannot fix a failing slab. Ask us about the downsides of epoxy, and we answer honestly.
Call (661) 545-6676 or send the form at the top of the page. We reply the same day with a time to measure.