ACCENTEpoxy Floors
ACCENTEpoxy Floors
Our crew is based right here in Lancaster, so garage floors, shop floors and storefront floors across the city are a short drive from the first estimate to the last coat.
Accent Epoxy Floors is based in Lancaster and installs epoxy garage floors, patios, shop floors and commercial floors across the city. A two-car flake epoxy floor takes one day and costs $2,600 to $4,000. We diamond grind every slab, use VOC-free polyaspartic sealant and give you a free estimate with a fixed written quote.
Accent Epoxy Floors is a Lancaster business, so this is the one city where the crew starts the morning at home. Lancaster is a charter city of 173,516 people (2020 census), incorporated in 1977 and sitting at about 2,359 feet above sea level. We coat floors in all five of its ZIP codes, 93534, 93535, 93536, 93539 and 93584, from garages and patios to workshops and storefronts. Call (661) 545-6676 Monday through Thursday 8 AM to 5 PM or Friday 8 AM to 2 PM, and you reach a local business that is 5-star rated on Google.
The housing numbers explain a lot about the work here. The 2020 census counted 55,137 housing units in Lancaster, 58.8 percent owner-occupied and 41.2 percent rented. The city has also required solar panels on new homes since 2014, so rooftops here already work hard in the sun, and the same sun is what your driveway, patio and pool deck have to live with. Homeowners usually call about a garage floor. Landlords call about turning a stained slab into something easy to clean between tenants. Business owners call about a shop or retail floor.
We work across the city: The BLVD, Downtown and Old Town, West Lancaster, Lancaster Town Center, and the industrial areas along Avenue G near Fox Field and in the Southern Amargosa area. Pick a flake epoxy floor, a solid color epoxy floor, a metallic epoxy floor or a quartz finish, and look through the color chart before the visit. We measure the slab, test it for moisture and cracks, explain the steps in plain language and give you a fixed written quote. Our other service areas are listed on our service areas page.
Because we live and work in the same valley, we do not lose a day to travel. A free estimate in Lancaster is usually a quick trip, and we reply the same day you contact us. That matters more than it sounds, because the best install windows in the Antelope Valley are short. A typical July here has a daytime high of about 98 degrees and an overnight low of about 67, a spread of roughly 30 degrees in a single day. A slab that is cool at dawn can be hot enough by early afternoon to shorten the working time of the coating and push air out of the concrete as it warms. We plan for that. Summer jobs start early, material is mixed in batches we can place before it thickens, and we keep the work out of direct afternoon sun where we can. A standard two-car flake epoxy floor takes one day from the first pass of the diamond grinder to the last coat, and it runs $6.50 to $10 per square foot, or $2,600 to $4,000 for a garage up to 400 square feet. Winter has its own limits, since Lancaster sees about 68 mornings a year at or below freezing, so we watch slab temperature before we start. Ask us about the written warranty when you get your quote.
With more than four in ten Lancaster homes rented, a lot of garage floors belong to landlords and property managers. The goal there is different from a homeowner's show garage. You want a floor that hides tire marks, wipes clean after a move-out and does not need babysitting. A solid color epoxy floor gives a seamless, uniform surface and takes about three days, with projects starting at $3,800 and running $9.50 to $11.50 per square foot. A flake epoxy floor is faster, one day, and the flake hides stains and small slab flaws well. If the budget is tight and you only want to protect and dust-proof bare concrete, grind and seal runs $6.50 to $9 per square foot, about $2,600 to $3,600 for a typical garage. We can give you a single written quote for several addresses, matching colors from the color chart so every unit looks consistent. Tell us which tenants use the garage for parking and which for storage, because that decides how much traction and wear resistance to build in.
Lancaster's working side runs along Avenue G and the Fox Field industrial corridor, with business parks such as North Valley Industrial Center, Lancaster Business Park, Enterprise Business Park and Centerpoint Business Park, plus the Southern Amargosa industrial area. Aerospace is the corridor's identity, and the city also hosts solar and battery manufacturing, including BYD bus and battery storage facilities. We do not guess at what a commercial floor needs. A repair bay, a machine shop, an assembly area and a storage warehouse each call for a different system, and an anti-static or chemical-resistant coating is specified after we see the room, the equipment and the spills. Commercial and industrial floors are quoted after a site visit, not from a price list. During that visit we check concrete condition, joints, loading paths and how much downtime you can take. Many owners schedule coating in phases so a section stays in use while another cures. We can also add cove base where a floor meets a wall, which keeps water and dirt out of the corner. Bring any drawings, product lists or spill concerns you have, and we will build the quote around them.
The BLVD runs along Lancaster Boulevard from 10th Street West to Sierra Highway, and Old Town sits around it with older buildings and smaller spaces. Shops, salons, restaurants and offices here need floors that look good under customers' eyes and still survive a day of foot traffic, rolling carts and mopping. A commercial floor in a small space is often done in a weekend window or after closing, depending on the system. Metallic epoxy floors, at $12.50 to $18.50 per square foot and 3 to 4 days, suit a lobby or showroom where the floor is part of the design. Solid color works well in kitchens, back rooms and salons, and a quartz finish adds traction where floors get wet. We seal walls, thresholds and drains with a cove base when the room calls for it, and we explain cleaning rules before you reopen. Your final price is quoted after a site visit, because a 300 square foot salon and a 3,000 square foot restaurant are different jobs. Tell us your opening date and we will work backwards from it.
We install floors throughout Lancaster and the surrounding area, including these neighborhoods and ZIP codes.
Local resources: City of Lancaster
Lancaster has a semi-arid, nearly desert climate. The mean July high is 97.6 degrees and the mean January high is 58.7 degrees. January nights average 31.3 degrees, and about 68 mornings a year are at or below freezing. The record high is 115 degrees (June 30, 2013) and the record low is 2 degrees (December 24, 1984). Rain totals just 6.81 inches a year, and snow averages about 2 inches. National Weather Service advisories for Lancaster and Palmdale mention south to southwest winds of 20 to 35 mph with gusts to 50 mph, and blowing dust that can cut visibility below a mile. In November 2023 a hard freeze dropped a Lancaster low to 22 degrees. For your floor that means a UV-stable polyaspartic topcoat on anything sun-exposed, a smooth sealed surface that sweeps clean after a dust event, and install days chosen around slab temperature.
Durable, easy-to-clean garage floors that resist hot-tire pickup, oil and salt. Most two-car garages are done in one day.
Learn more →Full-rejection flake over a moisture-barrier epoxy basecoat, sealed with a UV-stable polyaspartic topcoat. Installed in one day.
Learn more →A clean, seamless pigmented floor in gloss, satin or matte for garages, workshops, interiors and commercial spaces.
Learn more →Hand-guided metallic pigments create marble and lava effects, so no two floors look alike. A statement floor for homes and showrooms.
Learn more →Double-broadcast colored quartz or a sand finish for extra grip and durability on stairs, patios, mudrooms and commercial floors.
Learn more →Diamond-ground concrete finished with a clear sealer for a natural, low-maintenance floor at the lowest installed price.
Learn more →UV-stable, slip-resistant coatings for patios, walkways, driveways and pool decks that stay cooler underfoot.
Learn more →Seamless, hygienic floors for offices, retail, restaurants, warehouses and plants, installed around your hours.
Learn more →Timelines: Flake system 1 day · Metallic system 3–4 days · Quartz & sand finish system 2–3 days · Solid color system 3 days. Pick a color from the color chart.
Typical ranges for the area. Minimum project $2,600. Commercial and industrial work is quoted after a site visit.
| System | Price per sq ft | Typical project |
|---|---|---|
| Flake system (garage, up to 400 sq ft) | $6.50 – $10 per sq ft | $2,600 – $4,000 |
| Solid color system | $9.50 – $11.50 per sq ft | $3,800 – $4,600 |
| Metallic epoxy system | $12.50 – $18.50 per sq ft | $5,000 – $7,400 |
| Quartz & sand finish system | $9 – $16.50 per sq ft | $3,600 – $6,600 |
| Grind & seal (clear sealer) | $6.50 – $9 per sq ft | $2,600 – $3,600 |
| Patio, driveway & pool deck | $8 – $12 per sq ft | $3,200 – $4,800 |
| Commercial & industrial | Quoted after a site visit | Quoted per project |
Prices and details reviewed November 2026. Project examples assume a two-car garage up to 400 sq ft. Free on-site measurement and written estimate.
To prepare a garage for epoxy, empty it completely, move vehicles out, clear the walls, unplug appliances and make sure the crew has access to power and the space around the floor. The crew handles grinding, crack repair and cleaning, so do not etch, paint or seal the floor yourself.
Read the answer →Epoxy turns yellow because ultraviolet light and heat slowly break down the resin, a change called ambering. It shows first where sun hits the floor, usually near the garage door. A UV-stable polyaspartic topcoat, a color that hides slight change and less direct sun on the slab are what prevent it.
Read the answer →A sealed epoxy or polyaspartic floor stops bare concrete from shedding powder, but it cannot keep wind-blown desert dust out of the garage. What it does is make that dust easy to see and easy to remove. Seal the slab, seal the door edges, and dust mop before you wet mop.
Read the answer →The best way to clean an epoxy garage floor is to dust mop or blow off the grit, then mop with warm water and a mild pH-neutral cleaner using a soft mop or microfiber pad. Rinse, then dry. Skip acids, harsh solvents, wax and abrasive pads that can dull the finish.
Read the answer →Epoxy flooring in Lancaster costs $6.50 to $10 per square foot for a flake system, or $2,600 to $4,000 for a two-car garage up to 400 square feet. Solid color starts at $3,800, metallic runs $5,000 to $7,400 and grind and seal runs $2,600 to $3,600. Our minimum project is $2,600. A free estimate gives you a fixed written quote.
For most Lancaster garages, a flake epoxy floor with a UV-stable polyaspartic topcoat is the best balance of price, grip and durability. The flake hides dust and tire marks, and the topcoat handles the sun and temperature swings. Sun-exposed driveways and patios do better with a quartz or sand finish. If you only want a natural look, grind and seal protects bare concrete for less.
Usually not for a residential garage floor coating, because it is a surface finish and not structural work, but rules can vary by project. Commercial spaces, changes to a building or work in a managed community may have extra steps. The City of Lancaster building office can confirm for your address. We can tell you what we have seen locally before we start.
A well-prepped epoxy floor can last many years in a Lancaster garage, but life depends on prep, use and sun exposure. Diamond grinding gives the coating a bonding profile, and a UV-stable topcoat resists yellowing and hot-tire pickup. Outdoor slabs wear faster than garages. Ask us about the written warranty when you get your quote.
Yes, on bare, sound concrete, and also over old coatings or sealers once we grind them off. We cannot coat directly over loose paint, peeling coatings or a damaged slab until it is ground and repaired. New concrete usually needs time to cure before coating. Tile, wood or carpet usually need a look first, since the slab underneath is what gets coated.
A standard two-car flake epoxy install takes one day. Solid color takes about three days, metallic takes 3 to 4 days and a quartz or sand finish takes 2 to 3 days. Move cars and shelving out before we arrive. Ask us when you can walk and drive on the floor, since that depends on the system and the slab temperature that day.
Yes. We coat shop, warehouse, retail and office floors in Lancaster, including the industrial areas along Avenue G. Commercial and industrial floors are quoted after a site visit, because the right system depends on traffic, spills, equipment and downtime. Anti-static and chemical-resistant coatings are specified after we see the space, not from a catalog.
Yes. Driveways, patios, pool decks and stairs in Lancaster run $8 to $12 per square foot, about $3,200 to $4,800 for typical projects. We recommend a quartz or sand finish for grip and a UV-stable polyaspartic topcoat to resist sun and hot tires. Outdoor jobs depend on weather, so we pick a day with stable temperatures and little wind.
Call (661) 545-6676 or send the form at the top of the page. We reply the same day with a time to measure.