ACCENTEpoxy Floors
ACCENTEpoxy Floors
Garage, patio and shop floors across one of California's biggest cities by area, about 32 miles from our Lancaster base.
Accent Epoxy Floors installs epoxy garage floors, patios, shop floors and commercial floors in California City, about 32 miles straight-line from our Lancaster base. A two-car flake epoxy floor takes one day and costs $2,600 to $4,000. We book a free estimate and send a fixed written quote.
California City is big in a way few California cities are. It covers 203.7 square miles, which makes it the third-largest city in the state by land area, and it is home to 14,973 people at about 2,405 feet. Developers founded it in 1958 as a planned community, and the city incorporated on December 10, 1965. Much of the original street grid was never built, so houses sit scattered among large empty tracts. For us that means one practical thing: estimates start with a clear property location, a gate code if there is one and a note on how the crew gets to the garage. Our crew travels from Lancaster, about 32 miles away in a straight line, and we plan the visit as a full trip.
The 2020 census counted 5,196 housing units here, and 57.2 percent of occupied homes are owner-occupied. Many households have a tie to work on the base or the test ranges,. We keep scheduling simple. A flake epoxy floor is a one-day install, so a garage can be back in use by the next day. Call (661) 545-6676 and we reply the same day, with a fixed written quote after the free estimate. We also stop by to look at the slab itself, because a sealed floor is far easier to sweep and mop than raw concrete.
We cover all of California City in ZIP codes 93504 and 93505, from Central Park and the golf course to Balsitis Park, the area around the municipal airport and homes along the SR 14 and SR 58 corridors. For zoning or business-license questions, the City of California City is the right office. We handle the floor itself. Choose a flake epoxy floor, a solid color epoxy floor, a metallic epoxy floor or a quartz finish, and look through the color chart before you decide.
We install floors throughout California City and the surrounding area, including these neighborhoods and ZIP codes.
Local resources: City of California City
California City sits near 2,405 feet in the Mojave Desert. The mean daily high is 97F in July and 58F in January, the mean January low is 34F, and annual precipitation is about 6.63 inches. Summer slabs run hot and winter mornings can freeze, so we schedule coating for steady slab temperatures and start early. Sun-exposed concrete gets a UV-stable polyaspartic topcoat, and every slab is diamond ground and vacuumed right before the basecoat so wind-blown dust does not get under the coating.
California City was laid out in 1958 as a planned community, and a 1977 FTC settlement over misleading land sales is part of its history. Today the result is a city with broad spaces between homes and a lot of room on each property. That tends to mean bigger garages, detached shops, wide drives and long walkways, and bigger concrete means pricing by the square foot matters. A flake epoxy floor runs $6.50 to $10 per square foot, or $2,600 to $4,000 for a two-car garage up to 400 square feet. A garage that is bigger than 400 square feet costs more in proportion, and a detached shop is measured the same way. Our minimum project is $2,600. We walk the property at the estimate, measure every area you want coated, check the slabs for cracks and moisture and give you one fixed written quote. If you have a shop and a garage on the same lot, we can plan both in one visit so the crew mobilizes once. Tell us at the estimate which building you use most, and we can start with that one. For safety and ease of access, we ask that the garage be cleared and a path to the slab be open on install day. If a gate, a long drive or a rough road is in the way, tell us when we book, and we will plan the arrival.
Edwards Air Force Base, about 18 miles southeast, is a major employer for the city. The Hyundai/Kia Proving Grounds cover 3,967 acres inside city limits, and California City Municipal Airport is also in town. Plenty of residents spend long days on those sites and come home to a garage that has to be tough and easy to keep clean. Commercial and industrial floors, including shop floors and hangars, are quoted after a site visit, because the right system depends on fuel, oil, hydraulic fluid and solvent exposure, tire loads, slab condition and how long the space can be closed. A solid color epoxy floor, which takes three days, is a common shop answer and starts at $3,800 in a garage. For small businesses, a seamless floor with a cove base turns the wall joint into a sealed curve that mops out. If your building sits on base or leased land, check with the landlord or the right office about approvals before work starts, because we cannot confirm those for you. We can phase the work so you keep part of the building in use. We can also add anti-static or chemical-resistant coatings where a shop calls for them. Those are specified after the visit, not guessed at from a photo.
Central Park holds a 26-acre man-made lake, and the city also has a golf course and Balsitis Park. Patios, covered porches and pool decks in full sun take a beating. Bare concrete outdoors stains and wears, especially around grills, planters and hoses. Outdoor coatings for patios, driveways and pool decks run $8 to $12 per square foot, or $3,200 to $4,800 for typical projects. We usually apply a quartz finish or a sand finish under a UV-stable polyaspartic topcoat, which gives traction when wet and does not yellow the way ordinary epoxy can. Quartz finishes run $9 to $16.50 per square foot and take two to three days. Lighter colors stay cooler under bare feet. We seal at joints and edges, and we plan slopes so water leaves the surface. If your yard is gravel next to concrete, we coat the concrete and finish the transition cleanly. Ask for a sample against your own concrete. Water for hoses and rinsing is the main upkeep; the sealed surface does not need waxing.
In 2016 California City became the first Kern County city to allow commercial cannabis cultivation. If you own or lease a licensed facility, a warehouse, a workshop, a retail space or an office, a seamless commercial floor helps with cleaning. Wash-down areas need a floor that does not hold moisture, and there are no grout lines to trap residue. Facility rules come from the city and the state, so confirm what is required before choosing a finish. We specify and quote commercial floors after a site visit and schedule around your operation. Because facility rules come from the city and the state, we leave those decisions with you and your compliance contacts, and we focus on the floor: grinding, repairing, coating and sealing. A written scope and product sheet from us can go straight into your paperwork. Quotes are fixed and in writing after a site visit.
Durable, easy-to-clean garage floors that resist hot-tire pickup, oil and salt. Most two-car garages are done in one day.
Learn more →Full-rejection flake over a moisture-barrier epoxy basecoat, sealed with a UV-stable polyaspartic topcoat. Installed in one day.
Learn more →A clean, seamless pigmented floor in gloss, satin or matte for garages, workshops, interiors and commercial spaces.
Learn more →Hand-guided metallic pigments create marble and lava effects, so no two floors look alike. A statement floor for homes and showrooms.
Learn more →Double-broadcast colored quartz or a sand finish for extra grip and durability on stairs, patios, mudrooms and commercial floors.
Learn more →Diamond-ground concrete finished with a clear sealer for a natural, low-maintenance floor at the lowest installed price.
Learn more →UV-stable, slip-resistant coatings for patios, walkways, driveways and pool decks that stay cooler underfoot.
Learn more →Seamless, hygienic floors for offices, retail, restaurants, warehouses and plants, installed around your hours.
Learn more →Timelines: Flake system 1 day · Metallic system 3–4 days · Quartz & sand finish system 2–3 days · Solid color system 3 days. Pick a color from the color chart.
Typical ranges for the area. Minimum project $2,600. Commercial and industrial work is quoted after a site visit.
| System | Price per sq ft | Typical project |
|---|---|---|
| Flake system (garage, up to 400 sq ft) | $6.50 – $10 per sq ft | $2,600 – $4,000 |
| Solid color system | $9.50 – $11.50 per sq ft | $3,800 – $4,600 |
| Metallic epoxy system | $12.50 – $18.50 per sq ft | $5,000 – $7,400 |
| Quartz & sand finish system | $9 – $16.50 per sq ft | $3,600 – $6,600 |
| Grind & seal (clear sealer) | $6.50 – $9 per sq ft | $2,600 – $3,600 |
| Patio, driveway & pool deck | $8 – $12 per sq ft | $3,200 – $4,800 |
| Commercial & industrial | Quoted after a site visit | Quoted per project |
Prices and details reviewed November 2026. Project examples assume a two-car garage up to 400 sq ft. Free on-site measurement and written estimate.
Epoxy or polyaspartic is a good base for a garage gym, but it is not a replacement for mats. The coating handles racks, benches and foot traffic well. It does not cushion impact, so dropped weights can chip it. Use mats or platforms where you lift heavy and drop plates.
Read the answer →Yes, a fully cured epoxy or polyaspartic floor is a safe, easy-to-clean surface for dogs, kennels and grooming rooms. The sealed surface does not soak up urine or fur. The real tradeoffs are paw traction when wet, which cleaners you use, and keeping animals off the floor until it has cured.
Read the answer →The right aircraft hangar floor is one specified for the hangar, not borrowed from a garage. It must resist fuel, Skydrol and hydraulic fluid, carry tugs, jacks and aircraft loads, stay slip resistant, and fit your downtime. Accent Epoxy Floors specifies the system after a site visit.
Read the answer →Plan on about one day of coating work for a flake system, two to three days for quartz, three days for solid color and three to four days for metallic. Your total closure also depends on moving stock, repairs and cure time before heavy traffic, so we confirm a schedule during the site visit.
Read the answer →Yes. Our crew travels from Lancaster, and California City is about 32 miles away in a straight line. We serve garages, patios, shops and commercial spaces here. Call (661) 545-6676 Monday through Thursday 8 AM to 5 PM, or Friday 8 AM to 2 PM, and we reply the same day with a time for your free estimate.
A flake epoxy garage floor costs $6.50 to $10 per square foot, or $2,600 to $4,000 for a two-car garage up to 400 square feet. Our minimum project is $2,600. Larger garages cost more because pricing follows square footage. A free estimate gives you a fixed written quote before any work.
A flake epoxy floor takes one day to install, so most garages are back in use quickly. Solid color takes three days, metallic three to four days, and quartz or sand finishes two to three days. We tell you when you can walk on the floor and when cars can return.
Yes, after a site visit. Shop and hangar floors are specified by the fluids they see, such as fuel and hydraulic fluid, the loads on the slab and the downtime you can accept. Commercial and industrial floors are quoted after that visit. A solid color epoxy floor for a garage starts at $3,800.
Yes, for most owners. A sealed floor resists oil, tire marks and desert dust, and it sweeps and mops clean. Flake epoxy costs $6.50 to $10 per square foot, and grind and seal is $6.50 to $9. A free estimate shows exactly what your slab needs and what it will cost.
A quartz or sand finish under a UV-stable polyaspartic topcoat is our usual pick. It gives traction when wet and handles strong sun. Patios, driveways and pool decks run $8 to $12 per square foot, or $3,200 to $4,800 for typical projects. Quartz finishes run $9 to $16.50 per square foot.
Rules depend on the property, so check with the City of California City. Coating an existing slab differs from new construction, but we cannot confirm permit requirements for you. Commercial and licensed facilities may have extra rules. We can provide a written scope and product sheet if the city or a landlord asks.
A metallic epoxy floor costs $12.50 to $18.50 per square foot, or $5,000 to $7,400 for a two-car garage, and takes three to four days. It suits a showpiece garage, a bar or a studio. A solid color floor starts at $3,800. Bring a photo to the estimate and we will show samples.
Call (661) 545-6676 or send the form at the top of the page. We reply the same day with a time to measure.