ACCENTEpoxy Floors
ACCENTEpoxy Floors
Shop, hangar and garage floors for a town built around the spaceport, about 26 miles north of our Lancaster base.
Accent Epoxy Floors coats garage floors, shops and commercial spaces in Mojave, about 26 miles straight-line north of our Lancaster base. A two-car flake epoxy garage floor takes one day and costs $2,600 to $4,000. Hangar and industrial floors are specified and quoted after a site visit.
Mojave is a desert community of 4,699 people in Kern County, at about 2,762 feet where State Routes 14 and 58 meet. The town has been a crossing point for a long time. It was the western end of the 20-mule-team borax route from 1884 to 1889, and today the Mojave Air and Space Port is the reason many people live and work here. SpaceShipOne launched from the airport on June 21, 2004, the first private spaceflight, and the Rutan Voyager, the first aircraft to fly around the world nonstop without refueling, was based here. Accent Epoxy Floors drives up from Lancaster, about 26 miles away in a straight line.
Mojave's housing is different from most of the valley. Of 1,906 housing units counted in 2020, only 39.4 percent of occupied homes are owner-occupied and 60.6 percent are rented. That changes who calls us. Some of our Mojave conversations are with owners who want a lasting garage floor, some are with landlords who want an easy-clean surface between tenants, and some are with business owners who need a floor that keeps up with equipment. We handle all three with a free estimate, a same-day reply and a fixed written quote.
We serve Mojave in ZIP codes 93501, 93502 and 93519, from the streets near the Mojave Transportation Museum and the LADWP Mojave District Headquarters to the airport area and the SR 14 and SR 58 corridors. Choose a flake epoxy floor for garages, a solid color epoxy floor for shops, a metallic epoxy floor for showrooms or a quartz finish for patios and walkways, and look through the color chart. Every system is built on diamond grinding and a moisture check. We group estimates and installs by area on our northern runs along SR 14, and we tell you the plan in advance.
The Mojave Air and Space Port handles flight testing, space industry development, and aircraft heavy maintenance and storage, and Scaled Composites and the National Test Pilot School both work from the airport. Those uses put hard demands on a floor. Hangar and shop floors face aircraft fuel, hydraulic fluid, Skydrol, tire loads, tow bars, jack stands and constant cleaning. For that reason we do not sell hangars from a price list. We specify the system after a site visit, where we look at the slab, its age and cracks, what fluids and loads it sees, how much downtime you can accept and how the floor needs to look. Commercial and industrial floors are quoted after that visit. The system might be a solid color epoxy or a chemical-resistant coating, and in some spaces an anti-static finish is the right call. Cove base keeps fluids out of wall joints, and a texture can add grip where it is needed. If you manage a hangar, ask your lease holder or airport authority what approvals you need before the work begins, because we cannot confirm those rules for you. We schedule in phases when an aircraft or a test program cannot move. For a smaller hangar-style building on private property, the process is the same: measurements, a slab check, and a written scope with a fixed commercial quote. We can also coat the shop space, office and break room in the same visit so the whole building matches.
With 60.6 percent of Mojave's occupied homes rented, a lot of garages and shops here belong to someone other than the person using them. If you rent, get your landlord's written approval before any coating. The conversation goes better with a clear scope, a price and a finish that adds value to the property. For landlords, grind and seal is the budget route: $6.50 to $9 per square foot, or $2,600 to $3,600 for a typical garage, with a sealed natural concrete look that wipes clean between tenants. A flake epoxy floor runs $6.50 to $10 per square foot, or $2,600 to $4,000 for a two-car garage up to 400 square feet, and installs in a single day, which keeps a vacant unit offline for less time. A solid color epoxy floor starts at $3,800. Owners of rental duplexes and small shop buildings often choose a single color and a flake broadcast that hides scuffs. We provide a written scope and product sheet with every quote, so a property manager or owner can see exactly what was applied. A floor that sweeps and mops clean also cuts the work of turning a unit over between tenants.
Mojave's average January low is 34.3F and its average July high is 97.7F, with the July low near 69.8F. The record high is about 118F and the record low about 9F, and the town gets about 5.9 inches of rain a year. A floor here has to live through the full range. In summer, a hot slab shortens the working time of epoxy and can push trapped air up into the coating as it warms, so we start early, keep batches small and avoid coating a slab that is climbing in temperature. In winter, cold concrete slows curing, so we wait for the slab to warm and the forecast to stay dry. Wind is part of life in the high desert, and fine dust finds its way into every garage. Coatings do not bond to dust, so we diamond grind and vacuum right before the basecoat. Sun-exposed concrete gets a UV-stable polyaspartic topcoat. Low rainfall helps, but we still test for moisture, since a damp slab can blister a coating. Where a test shows high readings, we use a moisture-barrier epoxy basecoat. Sun on a west-facing garage door can heat the slab in the afternoon even in a mild week, so we check the slab itself with a thermometer rather than trusting the forecast.
Not every job here involves an aircraft. Most Mojave homes need a floor that survives a truck, a toolbox and desert grit. A flake epoxy floor is our usual garage answer: one day to install, a full-rejection broadcast that hides dust and tire marks, and a topcoat that resists hot-tire pickup. A metallic epoxy floor takes three to four days, costs $12.50 to $18.50 per square foot, and runs $5,000 to $7,400 for a two-car garage. Outdoors, patios, driveways and pool decks run $8 to $12 per square foot, or $3,200 to $4,800 for typical projects. A quartz finish takes two to three days, costs $9 to $16.50 per square foot, and gives traction in the rare wet spell. Light colors stay cooler in the sun. If you keep a project car, a motorcycle or a workshop in the garage, a flake epoxy floor with a high-gloss topcoat makes the room easier to light and keep clean. Bring us your garage plans, and we will help you choose colors that look good under your lighting. All of this is quoted in writing, with a fixed price after a free estimate.
We install floors throughout Mojave and the surrounding area, including these neighborhoods and ZIP codes.
Local resources: Mojave Chamber of Commerce
Mojave is a true desert at about 2,762 feet. The average January high is 57.7F with a low of 34.3F, and the average July high is 97.7F with a low of 69.8F. The record high is about 118F, the record low about 9F, and annual rainfall is about 5.9 inches. Wind and fine dust are part of daily life, so every slab is diamond ground and vacuumed right before the basecoat, and sunny concrete gets a UV-stable polyaspartic topcoat.
Durable, easy-to-clean garage floors that resist hot-tire pickup, oil and salt. Most two-car garages are done in one day.
Learn more →Full-rejection flake over a moisture-barrier epoxy basecoat, sealed with a UV-stable polyaspartic topcoat. Installed in one day.
Learn more →A clean, seamless pigmented floor in gloss, satin or matte for garages, workshops, interiors and commercial spaces.
Learn more →Hand-guided metallic pigments create marble and lava effects, so no two floors look alike. A statement floor for homes and showrooms.
Learn more →Double-broadcast colored quartz or a sand finish for extra grip and durability on stairs, patios, mudrooms and commercial floors.
Learn more →Diamond-ground concrete finished with a clear sealer for a natural, low-maintenance floor at the lowest installed price.
Learn more →UV-stable, slip-resistant coatings for patios, walkways, driveways and pool decks that stay cooler underfoot.
Learn more →Seamless, hygienic floors for offices, retail, restaurants, warehouses and plants, installed around your hours.
Learn more →Timelines: Flake system 1 day · Metallic system 3–4 days · Quartz & sand finish system 2–3 days · Solid color system 3 days. Pick a color from the color chart.
Typical ranges for the area. Minimum project $2,600. Commercial and industrial work is quoted after a site visit.
| System | Price per sq ft | Typical project |
|---|---|---|
| Flake system (garage, up to 400 sq ft) | $6.50 – $10 per sq ft | $2,600 – $4,000 |
| Solid color system | $9.50 – $11.50 per sq ft | $3,800 – $4,600 |
| Metallic epoxy system | $12.50 – $18.50 per sq ft | $5,000 – $7,400 |
| Quartz & sand finish system | $9 – $16.50 per sq ft | $3,600 – $6,600 |
| Grind & seal (clear sealer) | $6.50 – $9 per sq ft | $2,600 – $3,600 |
| Patio, driveway & pool deck | $8 – $12 per sq ft | $3,200 – $4,800 |
| Commercial & industrial | Quoted after a site visit | Quoted per project |
Prices and details reviewed November 2026. Project examples assume a two-car garage up to 400 sq ft. Free on-site measurement and written estimate.
Yes, a garage slab should be checked for moisture before it is coated, even in a dry desert climate. Concrete can hold and pass water vapor, and that vapor can push a coating off the slab. Calcium chloride and in-slab relative humidity tests measure it, and a moisture-barrier basecoat protects against it.
Read the answer →Yes, epoxy can handle an RV garage or workshop, because the concrete slab carries the weight and the coating protects its surface. The slab must be sound. A good system adds a deep bond, traction and a UV-stable topcoat. Large floors are measured and quoted at a free estimate.
Read the answer →A coated pool deck is not slippery or too hot when it is built for the job. Slip resistance comes from texture added to the topcoat, and surface temperature depends mostly on color and sun. Lighter colors run cooler. Accent Epoxy Floors coats pool decks with a UV-stable topcoat and a grip finish.
Read the answer →For a car collector or show garage, a metallic epoxy floor gives the most dramatic showroom look, while a flake floor is the easier one to live with. Metallic shows dust, scratches and tire marks more and costs more. Flake hides wear, installs in one day and costs less.
Read the answer →Yes. Our crew works from Lancaster and serves Mojave, about 26 miles north in a straight line, and California City too. Call (661) 545-6676 Monday through Thursday 8 AM to 5 PM, or Friday 8 AM to 2 PM. We reply the same day and schedule your free estimate.
A flake epoxy garage floor costs $6.50 to $10 per square foot, or $2,600 to $4,000 for a two-car garage up to 400 square feet. Our minimum project is $2,600. Grind and seal is $6.50 to $9 per square foot. A free on-site estimate gives you a fixed written quote.
Yes, but we specify the system after a site visit. We check the slab, the fluids it sees, such as fuel, Skydrol and hydraulic fluid, the loads from aircraft and equipment, and how much downtime you can take. Pricing for hangars and industrial floors is quoted after that visit, not from a flat rate.
Yes, with your landlord's written approval. Ask before any work and share our scope and price so the owner sees what is being applied. Grind and seal at $6.50 to $9 per square foot or a one-day flake floor are the usual rental choices. We can provide a written product sheet.
A flake floor takes one day, solid color three days, metallic three to four days, and quartz or sand finishes two to three days. A standard two-car garage in flake is done in a single day. We tell you when the floor can take foot traffic and vehicles.
Yes, when it is installed for them. Mojave runs from a January average low of 34.3F to a July average high of 97.7F. We schedule coating for steady slab temperatures, grind for a strong bond and finish with a UV-stable polyaspartic topcoat that resists sun and hot tires.
Rules depend on the property, so check with Kern County and your landlord, lease holder or airport office if the space is at the Air and Space Port. Coating an existing slab differs from building new structures, but we cannot confirm permit requirements for you. We provide a written scope if asked.
A solid color epoxy floor starts at $3,800 and runs $9.50 to $11.50 per square foot. A metallic epoxy floor runs $12.50 to $18.50 per square foot, or $5,000 to $7,400 for a two-car garage. Solid takes three days, metallic three to four. Commercial floors are quoted after a site visit.
Call (661) 545-6676 or send the form at the top of the page. We reply the same day with a time to measure.